Hunan Zhenhua Analysis Instrument Co., Ltd.

HF-PJ-10/14 Phase Change Analyzer

HF-PJ-10/14 Phase Change Analyzer
Product Detailed

We are specialized in tester, instrument&analyzer of ceramics, inorganic non-metallic materials, glass, cement&engineering test.

    HF-PJ-10-14 Phase Change Analyzer


Main technical parameters:

1. Maximum temperature(oC): 1000 (1400 ), maximum temperature of cooling curve (oC):1000 (1200 ), accuracy: less than ± 1;

2. Heating rate: maximum 5oC / min, can achieve rapid heat up. Please make out technical parameters when ordering. Heating rate can be set, power parameters can be automatically / manually adjusted;

3. Supply voltage: 220V ± 10%, 50HZ;

4. Max power consumption: ≤ 3.5KW, can heat up by connecting to resistance furnace heating or induction heating furnace;

5. Scope and error of expansion measurement:  0 - 5 mm ± 0.1% FS;

6. Instructions of expansion: digital display;

7. Expansion measurement resolution: 1um;

8. With vacuum device (users need to configure it, vacuum  limit: 0.1MPa), and controlled atmosphere . vacuum degree should achieve 10-3pa,when ordering please make out technical parameters requirements;

9. Can complete expansion coefficient tests, materials phase transition temperature tests, and continuous cooling curve test;

10. Sample tube: quartz, AL2O3,etc;

11. Cooling rate: 30 / sec, 100 / sec, 200 / sec, cooling ways: cooling air, cooling gas, liquid nitrogen for cooling and other options;

12. CCT curve analyzes pre-test, critical temperature and continuous cooling curve analyze the test;

13. Automatic analysis software (Chinese interface).

Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.