Hunan Zhenhua Analysis Instrument Co., Ltd.

DB Acoustic Analyzer

DB Acoustic Analyzer
Product Detailed

We are specialized in tester, instrument&analyzer of ceramics, inorganic non-metallic materials, glass, cement&engineering test.

DB  Acoustic Analyzer

DB series (DB4, DB8, DB16) type multi-function acoustic meter is designed in line with the three aspects of new idea,theory,method,and technology of full wave seismic phase analysis, ultrasound earthquake model test, rock comprehensive physical property test, which are comprehensive used in solving engineering survey questions and uniform rock,soil,concrete structure and construction quality testing problems.The main features are with three component or more components piezoelectric transducers, multichannel,broadband,high sensitivity, microprocessor control and all wave train recording more waves and shocks. The instrument is high speed,multichannel,once or continuous connection, that can be used for well logging,loose circle,measuring the pile,highways,tunnels,bridges and indoor rock,ultrasonic earthquake model test. With super magnetic flex emissivesource and transducer can realize continuous emission, power similar to electric spark emissive power, while frequency can reach 8KC. It can proceed indoor,outdoor acoustic emission, 16 route shallow earthquak test. Provide variety of methods for various occasions ordinary acoustic wave testing.

Host machine: 4 route 20MC high speed 8 digit A/D conversion. 12,16 route 20MC high speed 10 digit A/D conversion. The host is with 4,12 or 16 channel transient state collection, each channel 32KB RAM with high cut-off frequency and low cut-off freguency optional. The machine has 16V and 1KV emission function, can connect super magnetic flex emissivesource etc.  


The main technical requirements:
1. Trigger: trigger type: CH1, CH2, CH3, CH4, priority trigger, external trigger,     computer trigger. 
   Trigger Mode: positive trigger, negative trigger, positive / negative trigger, open circuit trigger, short-circuit trigger.;
2. Channel: 1, 2, 4, 8, 16, 32, 64 ;
3. Amplifier bandwidth:
   upper webbing cut-off frequency: straight, 1MHz, 100KHz, 10KHz, 1KHz, 100Hz.
    below cut-off frequency: straight, 100Hz, 1KHz, 10KHz, 100KHz;    
4. Amplifier sensitivity: <1μV / 1 digits;
5. Amplifier attenuation multiples: two-group 1,2,5,10,20,50,100,200 attenuation;
6. Amplifier input impedance: 1KΩ;
7. Launch pulse voltage: low voltage: 160V. High Voltage: 1KV;
8. Sampling rate: 10-bit, 20MHz (DB4 is 8-bit, 20MHz);
9. Sampling interval: 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10 μS.
                   0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 4 Ms;
10. Negative latency points (for multi-channel): 2, 4, 8, 16, 32, 64, 128 byte (DB4 has no this point).;
                       0.25, 0.5, 1, 2, 4 Kb;
11. Sampling bytes: 0.5,1 K, 2K, 4K, 8K, 16K, 32K;
12. Measurement time: 0.05μS-163.84S;
13. Measurement time error: <1 sampling interval ± 10 ^ -4;
14. Outside trigger sensitivity: <± 0.2V;
15. Power consumption: about 2 or 6W.

Configurations: magnetostrictive emission source (optional). magnetostrictive transducer (optional). A variety of transducer (optional). Printer (optional). 586 laptop computers. Acoustic measurement software +6 V power adapter , relevant cable and joint

Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.